Aquatec 5858-2LM2-B534 Series Booster Pump .66 GPM, 3/8"JG, 24VAC

The Aquatec 5800 Series Pump is ideal for drawing water from a holding tank and pressurize it, or boosting pressure from a low pressure source. This pump features a bypass that is preset to 130 PSI.   

Features:

• 3-chamber construction
• Closed impervious diaphragm
• Asymmetrical manifold
• ByPass Default is set to 130 PSI
• Highest structural integrity
• Seven point clamping
• Engineered composite plastics
• Corrosion resistant metal
• Multiple porting options

Benefits:

• Adjustable switch and bypass settings
• Self-priming, auto-purging
• Near silent operation at lower flows
• Highly efficient
• Minimal pulsations
• 7 year design life
• Runs dry without damage

California residents Prop 65 Warning

WARNING!

This product contains materials known to the State of California to cause cancer and birth defects or other reproductive harm. www.p65warnings.ca.gov

Product Details
Amps	2.15 Amps @ 80 PSI
Diaphragm Materials	Santoprene
Housing Material	Nylon
Inlet Pressure	60 PSI
Liquid Temperature	Max 170 °F
Motor Rpm	2100 RPM
Power Source	Cord/Pressure Switch Wires
Pump Max Flow Rate (Gpm)	150
Push-In Size	3/8" OD
Series	5800
Suction Lift	Self prime up to 7 ft
Voltage Type	AC
Wire Option	Bare Wire
Type	Diaphragm Pump
Voltage	24VAC
Warranty & Certifications
Product Certification Standard	NSF/ANSI 58
Warranty	12 Months from Date of Purchase from Date of Purchase
Shipping Dimensions
Shipping Length	8.5 in.
Shipping Width	5 in.
Shipping Height	4.75 in.
Product Weight & Dimensions
Product Height	3.6"
Product Length	8.46"
Product Width	4"
Product Weight (lbs)	6.1