Pentek PCF1-10MB Mixed Bed Deionization Cartridge

The Pentek PCF1-10MB Mixed Bed Deionizing Cartridges have been developed to meet the requirements for deionized water in many industries. Pentek DI Cartridges are manufactured using a resin that has been subjected to additional steps to minimize the total organic carbon (TOC) level. These cartridges are a convenient and cost effective solution for many applications where low levels of total organic carbon (TOC) and total dissolved solids (TDS) are required.

Specification:

• Media: Semi-conductor grade mixed bed DI resin
  
• Length: 9-3/4"
  
• Temperature Rating: 40°F - 100°F
  
• Recommended Flow Rate: 0.25 gpm
  

Applications:

• Boiler make-up water
  
• Circuit board printing
  
• Cosmetics
  
• Humidification systems
  
• Power generating equipment
  
• Recirculating/cooling towers
  
• Jet water sprayers
  
• Lasers
  
• Medical/laboratory use
  
• Pharmaceutical use
  
• Steam and humidification
  
• Steam processors

Also known as Aries AF-10-4010, Pentek PCF1-10MB.


California residents Prop 65 Warning

WARNING!

This product contains materials known to the State of California to cause cancer and birth defects or other reproductive harm. www.p65warnings.ca.gov

Product Details
Capacity	270 Grains
Filter Application	DeIonization (DI)
Gaskets	Buna-N
Inner/Outer Wraps	Polypropylene
Max Temp (°F)	100
Min Temp (°F)	40
Cap Material	Polypropylene
Cartridge Style	Drop-in
Diameter	2-5/8"
Flow Rate	0.25 GPM
Media Type	Mixed Bed DI Resin Semi-Conductor Grade
Shipping Dimensions
Shipping Length	12.2 in.
Shipping Width	10.3 in.
Shipping Height	7.5 in.
Product Weight & Dimensions
Product Height	7.5 in.
Product Length	12.2 in.
Product Width	10.3 in.
Product Weight (lbs)	8.65