Toray TML20D-400 10500 gpd Low Fouling Membrane 8 x 40

The Toray TML20D-400 10500 gpd Low Fouling Membrane is designed to be used on water sources with high fouling potential such as water containing organics or bacteria. They can be used in multiple membrane systems to treat, municipal, industrial, commercial or process water.

Specifications:

• Feed Spacer: 34 mil
• Permeate Flow Rate: 10500 gallons per day
• Membrane Type: Polyamide Composite
• Applied Pressure: 225 psi
• Dimensions: 8" x 40"
• Chlorine Tolerance: 0 ppm
• Maximum Operating Temperature: 113° F
• Applications: Tap Water, Brackish Water, Well Water, Surface Water

NOTE: When used to replace a Koch TFC 8040 FR 400 or TFC 8040 FR 400 34 membrane, the Toray TML20D-400 flow will be short by approximately 800 gpd.

Compatible with:

CSM Membranes	RE8040 FEN, RE8040 FEN34, RE8040 FL, RE8040 FLR
Filmtec Membranes	BW30FR-400/34i, BW30FR-400
Hydranautics Membranes	CPA3, LFC3-LD
Koch Membrane Systems	TFC 8040 FR 375, TFC 8040 FR 400, TFC 8040 FR 400 34

California residents Prop 65 Warning

WARNING!

This product contains materials known to the State of California to cause cancer and birth defects or other reproductive harm. www.p65warnings.ca.gov

Product Details
Active Area	400 sq. ft.
Average Nacl Rejection	0.99
Chlorine Tolerance	<0.1 ppm
Cleaning Ph Range	1-13
Direction	Outside - In
Feed Water Temperature	77°F
Inlet Pressure	225 PSI
Material Of Construction	Cross-Linked Polyamide
Max Feed Silt Density Index	5 Silt Density Index
Max Pressure Drop	20 PSI Differential
Max Pressure (Psi)	600 psi
Max Temp (°F)	113°F
Membrane Type	Spiral Wound
Minimum Salt Rejection Cl- (%)	0.9965
Permeate Flow Rate	10,500 gpd (39.8)
Permeate Tube Diameter	1-1/8"
Ph Range	2-11
Recovery Rate	0.15
Diameter	7.9"
Origin	U.S.A.
Shipping Dimensions
Shipping Length	40 in.
Shipping Width	8 in.
Shipping Height	8 in.
Product Weight & Dimensions
Product Length	40 in.
Product Weight (lbs)	36