Filmtec SW30-4021 Sea Water 800 GPD RO Membrane Element

The Dow FILMTEC SW30-4021 Sea Water Membrane is specifically designed for applications where the higher TDS (Total Dissolved Solids) of marine water is addressed by the thin film composite which sustains the higher pressures typically utilized in sea water reverse osmosis applications while maintaining a 99.4 percent stabilized salt rejection.

Specifications:

• Up to 800 gallon per day production
• Up to 1000 psig
• Fits standard 4" housings or pressure vessels
• Highest flow rates available to meet the water demands of both sea-based and land-based desalinators
• May also be operated at lower pressure to reduce pump size, cost and operating expenses
• Improved FILMTEC seawater membrane combined with automated, precision element fabrication result in the most consistent product performance available

NOTE: Compatible with the Woongjin SaeHan CSM RE4021-SR and RE4021-SN sea water membranes.

Filmtec RO membranes are wet packed

Compatible with:

Filmtec Membranes

89740

California residents Prop 65 Warning

WARNING!

This product contains materials known to the State of California to cause cancer and birth defects or other reproductive harm. www.p65warnings.ca.gov

Product Details
Active Area	33 sq. ft.
Average Nacl Rejection	0.99
Chlorine Tolerance	<0.1 ppm
Cleaning Ph Range	1-13
Direction	Outside - In
Inlet Pressure	800 PSI
Inner/Outer Wraps	Fiberglass
Material Of Construction	Polyamide Thin-Film
Max Feed Silt Density Index	5 Silt Density Index
Max Flow Rate	16 gpd (3.6)
Max Pressure Drop	15 PSI Differential
Max Pressure (Psi)	1000psi
Max Temp (°F)	113°F
Membrane Type	Spiral Wound
Permeate Flow Rate	800 gpd (3.0)
Permeate Tube Diameter	3/4"
Ph Range	2-11
Cartridge Style	Drop-in
Change Frequency	5 Years
Diameter	3.9"
Shipping Dimensions
Shipping Length	21 in.
Shipping Width	5 in.
Shipping Height	5 in.
Product Weight & Dimensions
Product Length	21 in.
Product Weight (lbs)	5.75