Veolia Osmonics Desal AK2540TM RO Membrane Element 710 GPD LP-DRY

The Veolia Osmonics Desal A-Series, Thin-Film reverse osmosis membrane elements offer high flux and excellent sodium chloride rejection. AG High Rejection Brackish Water Elements are used when high rejection and low operating pressures are desired.

Features:

High Flux and Excellent NaCL Rejection
Thin-Flim Reverse Osmosis Membrane Element
710 Gallons Per Day
Dimensions: 2.5" x 40"
Male End Connections
Tape Outer Wrap
28 mil Feed Spacers
Operating Pressures as low as 200 PSIG

Element Membrane Diagram (not the encapsulated model):

California residents Prop 65 Warning

warning symbol

WARNING!

This product contains materials known to the State of California to cause cancer and birth defects or other reproductive harm. www.p65warnings.ca.gov

Product Details
Active Area	27 sq. ft.
Average Nacl Rejection	0.99
Chlorine Tolerance	1,000 ppm-hrs
Cleaning Ph Range	1-13
Direction	Outside - In
Feed Water Temperature	77°F
Inlet Pressure	100 PSI
Inner/Outer Wraps	Tape
Max Feed Silt Density Index	<5 Silt Density Index
Max Feed Water Turbidity	<1 Nephelometric Turbidity Units
Max Pressure Drop	12 PSI Differential
Max Pressure (Psi)	600psi
Max Temp (°F)	122 °F
Membrane Type	Spiral Wound
Permeate Flow Rate	750 gpd (2.8)
Permeate Tube Diameter	3/4"
Ph Range	2-11
Recovery Rate	0.15
Cartridge Style	Drop-in
Diameter	2.4"
Shipping Dimensions
Shipping Length	43.75 in.
Shipping Width	5.25 in.
Shipping Height	5.25 in.
Product Weight & Dimensions
Product Height	2.5
Product Length	40.5
Product Width	2.5
Product Weight (lbs)	3.361

1. Your order is usually shipped out within 24-48 hours after your payment is received.
2. The tracking number of your parcel will be sent to you after your order is despatched. You may use the tracking number to check the status of your order online.
3. The shipping fee will be auto-added in the grand total when you send payment.

4.8