Hydranautics ESPA2-7 8 x 40 Brackish Water 9,000 gpd RO Membrane is designed to operate with difficult feed water conditions and still produce a desirable combination of both high rejection and high flow. The ESPA2-7 provides a high level of performance while maintaining efficiency, resulting in lower energy consumption.
Specifications:
- Permeate Flow Rate: 9,000 gallons per day
- Membrane Type: Polyamide Composite
- Concentrate Flow Ratio: 5:1
- Salt Rejection: 99.5%
- Maximum Pressure: 600 psi
- Maximum Feed Flow: 75 gpm
- Applied Pressure: 150 psi
- Dimensions: 8" x 40"
- Permeate Recovery: 15%
- Maximum Operating Temperature: 113° F
- Applications: Tap Water, Brackish Water, Well Water, Surface Water
California residents
Prop 65 Warning
WARNING! This product contains materials known to the State of California to cause cancer and birth defects or other reproductive harm. www.p65warnings.ca.gov
| Product Details |
|---|
Active Area | 400 sq. ft. |
Average Nacl Rejection | 0.99 |
Chlorine Tolerance | <0.1 ppm |
Direction | Outside - In |
Feed Water Temperature | 77°F |
Inlet Pressure | 150 PSI |
Material Of Construction | Polyamide Thin-Film |
Max Feed Silt Density Index | 5.0 Silt Density Index |
Max Feed Water Turbidity | 1.0 Nephelometric Turbidity Units |
Max Flow Rate | 75 GPM (17.0 m3 /h) |
Max Pressure Drop | 10 PSI Differential |
Max Pressure (Psi) | 600psi |
Max Temp (°F) | 113°F |
Membrane Type | Spiral Wound |
Permeate Flow Rate | 9,000 gpd (34.1 m3 /d) |
Permeate Tube Diameter | 1-1/8" |
Ph Range | 6.5-7.0 |
Recovery Rate | 0.15 |
Diameter | 7.95" |
| Shipping Dimensions |
|---|
Shipping Length | 40 in. |
| Product Weight & Dimensions |
|---|
Product Length | 40 in. |
Product Weight (lbs) | 36 |
1. Your order is usually shipped out within 24-48 hours after your payment is received.
2. The tracking number of your parcel will be sent to you after your order is despatched. You may use the tracking number to check the status of your order online.
3. The shipping fee will be auto-added in the grand total when you send payment.