Filmtec SW30-8040 Sea Water 6000 GPD RO Membrane Element

The Dow FILMTEC SW30-8040 Sea Water Membrane is specifically designed for applications where the higher TDS (total dissolved solids) of marine water is addressed by the a thin film composite which sustains the higher pressures typically utilized in sea water reverse osmosis applications while maintaining a 99.1 percent stabilized salt rejection.

Specifications:

• Up to 6000 gallon per day production
• Up to 1015 psig
• Fits standard 8" housings or pressure vessels
• Highest flow rates available to meet the water demands of both sea-based and land-based desalinators
• May also be operated at lower pressure to reduce pump size, cost and operating expenses
• Improved FILMTEC seawater membrane combined with automated, precision element fabrication result in the most consistent product performance available

Filmtec RO membranes are wet packed


California residents Prop 65 Warning

WARNING!

This product contains materials known to the State of California to cause cancer and birth defects or other reproductive harm. www.p65warnings.ca.gov

Product Details
Active Area	300 sq. ft.
Average Nacl Rejection	0.99
Chlorine Tolerance	<0.1 ppm
Cleaning Ph Range	1-13
Direction	Outside - In
Inlet Pressure	800 PSI
Inner/Outer Wraps	Fiberglass
Material Of Construction	Thin-Film Composite
Max Feed Silt Density Index	5 Silt Density Index
Max Feed Water Turbidity	1 Nephelometric Turbidity Units
Max Flow Rate	60 gpm
Max Pressure Drop	50 PSI Differential
Max Pressure (Psi)	1015psi
Max Temp (°F)	113°F
Membrane Type	Spiral Wound
Minimum Salt Rejection Cl- (%)	0.986
Permeate Flow Rate	6,000 gpd (23)
Permeate Tube Diameter	1-1/8"
Ph Range	2-11
Change Frequency	5 Years
Diameter	7.9"
Origin	U.S.A.
Shipping Dimensions
Shipping Length	40 in.
Product Weight & Dimensions
Product Length	40 in.
Product Weight (lbs)	42