Optipure 160-50010 FX-11 Single 10" System

This Optipure 160-50010 FX-11 Single 10" System is a single-housing water treatment system with a drop-in 10” cartridge that reduces sediment down to 0.5-microns and reduces chlorine, taste & odor at a flow rate of 1.5 gpm for 15,000-gallons.

Features:

• Improves quality and consistency of cold and hot beverages. 
• Reduces maintenance frequency and cost, and extends equipment life.
• Gradient-density sediment filtration protects against dirt, rust and other debris down to 0.5-microns.
• High-capacity activated-carbon filtration makes water taste great and protects equipment against corrosive chlorine.
• Sturdy mounting bracket and full-flow inlet shut-off valve simplify installation.
• Built-in pressure gauge allows visual monitoring of when filters need to be changed.
• Inlet shut-off and depressurization valves make filter replacement quick and simple.
• Minimizes waste by only replacing drop-in cartridge and reusing filter sump.
• NSF Certified under Standard 42.
  

Specifications:

• Connection: Inlet & Outlet 1/2” FNPT
• Operating Pressure Range: 10 - 125 psi (0.7 - 8.6 bar)
• Inlet Water Temperature Range: 35˚ - 100˚F (2˚ - 38˚C)
• Service Flow Rate: 1.5 gpm (5.7 lpm)
• Sediment Reduction: 0.5 microns (nominal)

Installation Tips:

• Feed-water connection to system should be COLD only.
• Do not exceed system specifications for temperature and pressure.
• Allow 3” clearance below system for filter housing removal and cartridge replacement.
• Detailed installation, operation and maintenance manual included with each system.
• No activation procedure or flushing required for system to perform as specified.

California residents Prop 65 Warning

WARNING!

This product contains materials known to the State of California to cause cancer and birth defects or other reproductive harm. www.p65warnings.ca.gov

Product Details
Inlet Connection	1/2" FNPT
Max Pressure (Psi)	125
Max Temp (°F)	100
Micron Rating (Nominal)	0.5
Min Pressure (Psi)	10
Min Temp (°F)	35
Outlet Connection	1/2" FNPT
Flow Rate	1.5 GPM
Shipping Dimensions
Shipping Length	14.5 in.
Shipping Width	6.5 in.
Shipping Height	5 in.
Product Weight & Dimensions
Product Height	5.1
Product Length	14.5
Product Width	6.6
Product Weight (lbs)	6