Hydronix AR0020S54 AR Series 40" Filter

Construction of melt-blown polypropylene fiber, Poly-Ray pleated filter combines exceptional solids holding capabilities with precise micron ratings better than depth filters. Double sheets of melt-blown media provide absolute particle retention, high solid loading and long service life. Poly-Ray filters are also designed for membrane pre-filtration.

Specifications:

• End Cap Style - 222/Fin
• Double-layer structure, absolute efficiency
• 100% polypropylene for compatibility with a wide range of process fluids
• Manufactured in clean room, highly clean cartridge
• Pre-flush with 18 Megohm-cm DI water, TOC content lower than 40 ppb
• End configuration to fit all standard housings
• Certificated by USP XXXIII and FDA CFR Title 21
• Compatible with CUNO Betafine D and Polypro filtration
• Compatible with Pall HDC II and Ultipleat Profile filtration

California residents Prop 65 Warning

WARNING!

This product contains materials known to the State of California to cause cancer and birth defects or other reproductive harm. www.p65warnings.ca.gov

Product Details
Initial Pressure Drop	35.6 PSI Differential
Inner/Outer Wraps	Polypropylene
Max Pressure (Psi)	70 psid
Max Temp (°F)	203
Micron Rating (Absolute)	0.2 µm
O-Rings	Silicone
Psid@Flow Rate	2.8 psid @ 21.1 GPM
Cap Material	Polypropylene
Cartridge Style	Drop-in
Contaminants Reduced	Sediment/Dirt/Rust
Diameter	2-1/2"
End Cap Type	SOE 222 O-ring & Fin
Filter Construction	Melt Blown
Filter Type	Sediment Depth
Media Type	Poly-Ray Pleated Silicone
Micron Rating	0.2 µm ABS
Product Weight & Dimensions
Product Length	40"
Product Weight (lbs)	20