Watts Big-Bubba Pleated Cartridge, 20 Micron

The Watts Big-Bubba Pleated Filter Cartridge melt blown polypropylene cartridges are recommended when depth filtration is necessary for gelatinous substances and when chemical resistance may be a requirement.

Features:

• 20 Micron
• Double O-Ring Seals
• Jumbo Cartridge Filters

Disclaimer: Big Bubba® is a registered trademark of Watts Water Technologies, Inc, which is not affiliated or otherwise associated with Fresh Water Systems, Inc. or this site. Fresh Water Systems, Inc acknowledges and confirms that it has not been granted any license or authority from Watts Water Technologies, Inc to use the mark, and further confirms that any and all use of the mark on this site is for identification and descriptive purposes only and such use is not intended to, does not, and shall not be deemed to imply any association or affiliation between Watts Water Technologies, Inc. and Fresh Water Systems, Inc. of any nature whatsoever."


California residents Prop 65 Warning

WARNING!

This product contains materials known to the State of California to cause cancer and birth defects or other reproductive harm. www.p65warnings.ca.gov

Product Details
Core Material	Polypropylene
Initial Pressure Drop	30 PSI Differential
Max Temp (°F)	175
Micron Rating (Nominal)	20 µm
O-Rings	EPDM
Recommended Flow Rate	150 GPM
Cap Material	Polypropylene
Cartridge Style	Drop-in
Contaminants Reduced	Sediment/Dirt/Rust
Diameter	4-1/2"
End Cap Type	Single Open 222 O-Ring
Filter Construction	Pleated
Filter Type	Pleated
Flow Rate	150 GPM
Media Type	Thermally Bonded Polypropylene
Micron Rating	20 µm
Warranty & Certifications
Product Certification Standard	NSF/ANSI 61
Shipping Dimensions
Shipping Length	31 in.
Shipping Width	7 in.
Shipping Height	7 in.
Product Weight & Dimensions
Product Height	6
Product Length	30
Product Width	6
Product Weight (lbs)	5.596