PAE RO-132 Reverse Osmosis Storage Tank Powder Coated Steel 4.5 Gal with Tank Valve

$35.47 $30.92

In Stock
  • Model: NPROT-4.5-7540778270904

The PAE TankPAC RO-132 is built with FDA approved materials. The water storage chamber features a virgin polypropylene liner, high-grade chlorobutyl diaphragm and stainless steel...

Choose
Qty.
+ -
The PAE TankPAC RO-132 is built with FDA approved materials. The water storage chamber features a virgin polypropylene liner, high-grade chlorobutyl diaphragm and stainless steel 1/4" MPT water connection. The diaphragm is post cured to ensure that your water is tasteless, odorless and contaminant free.

Maintenance Free. The ROT-4.5 tank is built with a sealed brass air valve and o-ring sealed cap to ensure a leak-free air chamber, meaning no more checking the air precharge.

NSF Certified. This product is certified to NSF/ANSI Standard 58 for the reduction of contaminants using reverse osmosis technology.

Additional Specifications:
  • Stainless steel water connection
  • High-grade chlorobutyl diaphragm
  • Virgin polypropylene liner
  • Plastic tank stand included
  • CE approved
  • BPA free
  • Comes with Tank Valve: ABVFE-64
Reverse Osmosis Tank Maintenance and Accessories:
A tank shut-off valve is necessary to connect the tank to your reverse osmosis system and control the flow of water into and out of the tank. The valve is also essential for performing system service or maintenance. If your RO system uses 1/4" OD tubing to connect to the tank, select the LFPP4VFE4 valve. If your system uses 3/8" OD tubing select the PP6VFE4-MG valve.

For optimal performance, it is necessary to keep a pre-charge of approximately 7 psi in your tank. Most automotive tire pressure gauges either do not read below 10 psi, or are not very accurate at pressures this low. 54846 Tank Pressure Gauge reads pressures between 0 and 20 psi, making it perfect for RO tank maintenance.
The RO tank should be sanitized before initial use and during every filter change. The Reverse Osmosis Sanitizing Maintenance Kit features Sani-System, an EPA & NSF certified sanitizer, making it a great alternative to using chlorine bleach. The kit also includes a syringe for application of the sanitizer.

Compatible with:
AquaSkyROT-4Culligan Water Filters01004776GE WaterWS32X10021Microline Replacement FiltersC2000Reverse Osmosis Storage TanksAmtrol 141S351, RO-4, 140S351, 92294, TK-AM005WReverse Osmosis Storage TanksAmtrol RO-4 (141S351)Well Tank AccessoriesPAE RO-132,TK-PRO-4-SS, 15112006, 55984-05, ROT-4W

California residents Prop 65 Warning

warning symbol WARNING!

This product contains materials known to the State of California to cause cancer and birth defects or other reproductive harm. www.p65warnings.ca.gov



Product Details

Capacity

2.8 Gallons @ 40 psi

Diaphragm Materials

Butyl Rubber

Inlet Connection

1/4" MPT

Material Of Construction

Stainless Steel

Max Pressure (Psi)

100

Outlet Connection

1/4" MPT

Size

1/4"

Volume

4.5

Connection Type

Male (MPT)

Diameter

11"

Origin

Taiwan

Warranty & Certifications

Product Certification Standard

NSF/ANSI 58

Shipping Dimensions

Shipping Length

16 in.

Shipping Width

16 in.

Shipping Height

12 in.

Product Weight & Dimensions

Product Height

11.4 in.

Product Length

14.7 in.

Product Width

11.4 in.

Product Weight (lbs)

8.05





1. Your order is usually shipped out within 24-48 hours after your payment is received.
2. The tracking number of your parcel will be sent to you after your order is despatched. You may use the tracking number to check the status of your order online.
3. The shipping fee will be auto-added in the grand total when you send payment.
4.8
  • 66
  • 8
  • 0
  • 0
  • 0
Your Rating: