PAE RO-152 Reverse Osmosis Water Storage Tank Powder Coated Steel 5.5 Gallon - OPEN BOX

Consumer Note: All Tanks were set to Factory standard pressure for testing. Through the conducted test, no pressure was lost and no leaks were detected. This tank maintains full functionality with only exterior blemishes. This is a deal you cannot pass up! This item is selling As Is, no returns will be accepted.

The PAE RO-152 is built with FDA approved materials. The water storage chamber features a virgin polypropylene liner, high-grade chlorobutyl diaphragm and stainless steel 1/4" MPT water connection. The diaphragm is post cured to ensure that your water is tasteless, odorless and contaminant free. The tank is built with a sealed brass air valve and o-ring sealed cap to ensure a leak-free air chamber.

Features:

Stainless steel water connection
High-grade chlorobutyl diaphragm
Virgin polypropylene liner
Two part epoxy primer, polyurethane paint finish
Plastic tank stand included
NSF-58 and CE approved
Made in Taiwan
Reverse Osmosis Tank Maintenance and Accessories:

A tank shut-off valve is necessary to connect the tank to your reverse osmosis system and control the flow of water into and out of the tank. The valve is also essential for performing system service or maintenance. If your RO system uses 1/4" OD tubing to connect to the tank, select the LFPP4VFE4
valve. If your system uses 3/8" OD tubing select the PP6VFE4-MG
valve.
For optimal performance, it is necessary to keep a pre-charge of approximately 7 psi in your tank. Most automotive tire pressure gauges either do not read below 10 psi, or are not very accurate at pressures this low. 54846 Tank Pressure Gauge
reads pressures between 0 and 20 psi, making it perfect for RO tank maintenance.
The RO tank should be sanitized before initial use and during every filter change. The Reverse Osmosis Sanitizing Maintenance Kit features Sani-System, an EPA & NSF certified sanitizer, making it a great alternative to using chlorine bleach. The kit also includes a syringe for application of the sanitizer.

California residents Prop 65 Warning

warning symbol

WARNING!

This product contains materials known to the State of California to cause cancer and birth defects or other reproductive harm. www.p65warnings.ca.gov

Product Details
Diaphragm Materials	Butyl Rubber
Inlet Connection	1/4" MPT
Material Of Construction	Stainless Steel
Max Pressure (Psi)	100
Outlet Connection	1/4" MPT
Size	1/4"
Volume	5.5
Connection Type	Male (MPT)
Diameter	11-1/2"
Origin	Taiwan
Warranty & Certifications
Product Certification Standard	NSF/ANSI 58
Warranty	1 Year
Shipping Dimensions
Shipping Length	16.5 in.
Shipping Width	12 in.
Shipping Height	12 in.
Product Weight & Dimensions
Height W/ Stand	16.06"
Product Height	12 in.
Product Length	16.5 in.
Product Width	12 in.
Product Weight (lbs)	9

1. Your order is usually shipped out within 24-48 hours after your payment is received.
2. The tracking number of your parcel will be sent to you after your order is despatched. You may use the tracking number to check the status of your order online.
3. The shipping fee will be auto-added in the grand total when you send payment.

4.8