Watts R12-1200 Commercial Reverse Osmosis System 1200 gpd

The Watts R12-1200 light commercial reverse osmosis system is designed to provide the commercial and industrial user with the most trouble free, cost effective and reliable form of water treatment available, by providing every option necessary for a successful installation.  Choose from three available packages to get the features you need.

Features:

• Stainless steel frame
  
• Automatic inlet valve
  
• 10" pre-filter housing and 5 micron sediment filter
  
• Brass Procon pump
  
• 1/2 HP motor
  
• 2.5" liquid filled pressure gauge
  
• Fiberglass (FRP) pressure vessels
  
• Needle valve for concentrate and recycle lines
  
• Stainless steel check valve for product water
  
• Product pressure switch with auto/off
  
• Low-pressure shut-off with automatic restart
  

Additional features (Package 2 and 3):

• Pre-filter pressure gauges
  
• Flow meters on product and reject water lines
  

Additional features (Package 3):

• Automatic fast flush for concentrate
  

Disclaimer: Watts® is a registered trademark of Watts Water Technologies, Inc, which is not affiliated or otherwise associated with Fresh Water Systems, Inc. or this site. Fresh Water Systems, Inc acknowledges and confirms that it has not been granted any license or authority from Watts Water Technologies, Inc to use the mark, and further confirms that any and all use of the mark on this site is for identification and descriptive purposes only and such use is not intended to, does not, and shall not be deemed to imply any association or affiliation between Watts Water Technologies, Inc. and Fresh Water Systems, Inc. of any nature whatsoever.


California residents Prop 65 Warning

WARNING!

This product contains materials known to the State of California to cause cancer and birth defects or other reproductive harm. www.p65warnings.ca.gov

Product Details
Application	Aquarium Beverage Production Electronics Drinking Water Food Processing Ice System Misting Pharmaceuticals Spot-Free Rinse
Average Nacl Rejection	0.98
Capacity	1200 GPD
Inlet Connection	1/2" FPT
Inlet Pressure	10-90 PSI
Liquid Temperature	40-95 °F
Max Pressure (Psi)	200
Micron Rating (Nominal)	5 µm
Outlet Connection	1/2" FPT
Ph Range	3-11
Power	1/2 hp
Push-In Size	3/8" OD
Recovery Rate	15-75 Percent
Size	1/2"
Change Frequency	1200 GPD
Connection Type	Female (FPT)
Contaminants Reduced	Sediment/Dirt/Rust
Type	Booster Pump System
Voltage	120V
Warranty & Certifications
Warranty	1 Year
Product Weight & Dimensions
Dimensions	22" x 32" x 12"
Prefilter Length	10"
Product Weight (lbs)	200