The
Viqua SV5Q-PA Silver Series NSF Class B UV System is a reliable, economical and chemical-free way to safeguard drinking water in any residential application. This whole-house system is easy to maintain plus has a CSA and CE compliant power supply that is protected from damage and water intrusion. The Viqua SV5Q-PA Silver system has been designed and tested to ensure quality drinking water is at everyone´s fingertips.
Features:- Class B Certified by NSF
- Equipped to inactivate chlorine-resistant parasites such as Cryptosporidium and Giardia, harmful bacteria like E.Coli and viruses not visible to the naked eye
- Specially designed and tested Sterilume™-EX lamps provide consistent and reliable ultraviolet output over the entire life of the lamp (9000 hours) to ensure continuous purification
- The system is easy to maintain and service
- The ultraviolet lamp can be changed without interrupting the water flow
- Built with a durable stainless steel chamber to prolong life and eliminate ultraviolet light degradation
- The controller visually displays the remaining lamp life and will go into alarm if the lamp fails. The D4-V+ systems are equipped with a UV sensor which provides a continuous readout of UV intensity
NSF/ANSI Standard 55: Ultraviolet Microbiological Water Treatment Systems This standard establishes requirements for point-of-use (POU) and point-of-entry (POE) non-public water supply (non-PWS) ultraviolet systems and includes two optional classifications.
Class A systems (40mJ/cm²) are designed to disinfect and/or remove microorganisms from contaminated water, including bacteria and viruses, to a safe level.
Class B systems (16mJ/cm²) are designed for supplemental bactericidal treatment of public drinking water or other drinking water, which has been deemed acceptable by a local health agency.
California residents
Prop 65 Warning
WARNING! This product contains materials known to the State of California to cause cancer and birth defects or other reproductive harm. www.p65warnings.ca.gov
| Product Details |
|---|
Ambient Temperature Range | 36-104 °F |
Body Material | 304 Stainless Steel |
Features | Audible Lamp Failure Visual Power On |
Frequency Rate | 50/60 Hz |
Inlet Connection | 3/4" MPT |
Max Pressure (Psi) | 125 |
Min Pressure (Psi) | 5 |
Outlet Connection | 3/4" MPT |
Power | 30 Watts |
Size | 3/4" |
Connection Type | Male (MPT) |
Contaminants Reduced | Bacteria Heavy Metals Cysts |
Diameter | 2-1/2" |
Flow Rate | 5.2 GPM (16mJ/cm2 Dose) |
Type | Single UV System |
Voltage | 120 V |
| Warranty & Certifications |
|---|
Warranty | 7 yr for chamber, 1 yr for lamps and probes, 5 yr pro rated on all other components |
| Shipping Dimensions |
|---|
Shipping Length | 28 in. |
Shipping Width | 6 in. |
Shipping Height | 6 in. |
| Product Weight & Dimensions |
|---|
Power Supply Dimensions | 7.3"x3.2"x2-1/2" |
Product Length | 22" |
Product Weight (lbs) | 8.6 |



1. Your order is usually shipped out within 24-48 hours after your payment is received.
2. The tracking number of your parcel will be sent to you after your order is despatched. You may use the tracking number to check the status of your order online.
3. The shipping fee will be auto-added in the grand total when you send payment.