Pentek P5-40 40" Spun Polypropylene Sediment Filter 5 Mic

The Pentek P5-40 Spun-Bonded Polypropylene Sediment Depth Filter is a reliable and economical solution for pre-filtration in many applications. Typically utillized for a pre-filter in reverse osmosis systems and post-filtration in GAC filters. The sediment depth filter is 100% pure polypropylene for longer life and greater dirt holding capacity.

Features:

• Long filter life
• 100% pure polypropylene
• Exceptional dirt-holding capacity
• FDA approved materials
• Tested and certified by NSF to NSF/ANSI Standard 42
• Thermally bonded polypropylene micro-fiber construction for higher filtration efficiency
• Provides superior chemical resistance and is not prone to bacterial attack
• Consistent flow rate and superior filtration performance
• Not brittle or prone to breakage problems like resin-bonded cartridges
• Will not impart taste, odor or color to the liquid being filtered, which makes it ideal for food and beverage applications
• Ideal for a wide variety of industrial filtration

The Pentek P5-40 fits in housings that require 40 inch filters.

California residents Prop 65 Warning

WARNING!

This product contains materials known to the State of California to cause cancer and birth defects or other reproductive harm. www.p65warnings.ca.gov

Product Details
Initial Pressure Drop	0.2 PSI Differential
Material	Polypropylene
Max Temp (°F)	145
Recommended Flow Rate	10 GPM
Cartridge Style	Drop-in
Change Frequency	6 Months
Contaminants Reduced	Sediment/Dirt/Rust
Diameter	2.38"
Filter Construction	Melt Blown
Filter Type	Sediment Depth
Flow Rate	0.2PSI @ 10GPM
Media Type	Polypropylene
Micron Rating	5 µm
Warranty & Certifications
Product Certification Standard	NSF/ANSI 42
Shipping Dimensions
Shipping Length	40 in.
Shipping Width	3 in.
Shipping Height	3 in.
Product Weight & Dimensions
Dimensions	2.38" x 40"
Product Height	2.88"
Product Length	40"
Product Width	2.88"
Product Weight (lbs)	2