PAE RO-120 Reverse Osmosis Storage Tank Powder Coated Steel 2.1 Gal with Tank Valve

The PAE NPRO-120 is built with FDA approved materials. The water storage chamber features a virgin polypropylene liner, high-grade chlorobutyl diaphragm and stainless steel 1/4" MPT water connection. The diaphragm is post-cured to ensure that your water is tasteless, odorless and contaminant free. The tank is built with a sealed brass air valve and o-ring sealed cap to ensure a leak-free air chamber.
Features:

• Stainless steel water connection
• High-grade chlorobutyl diaphragm
• Virgin polypropylene liner
• Two part epoxy primer, polyurethane paint finish
• NSF-58 and CE approved
• Made in Tawain
  

• Comes with TANK VALVE: ABVFE-64

Reverse Osmosis Tank Maintenance and Accessories:
A tank shut-off valve is necessary to connect the tank to your reverse osmosis system and control the flow of water into and out of the tank. The valve is also essential for performing system service or maintenance. If your RO system uses 1/4" OD tubing to connect to the tank, select the LFPP4VFE4 valve. If your system uses 3/8" OD tubing select the PP6VFE4-MG valve.
For optimal performance, it is necessary to keep a pre-charge of approximately 7 psi in your tank. Most automotive tire pressure gauges either do not read below 10 psi, or are not very accurate at pressures this low. 54846 Tank Pressure Gauge reads pressures between 0 and 20 psi, making it perfect for RO tank maintenance.
The RO tank should be sanitized before initial use and during every filter change. The Reverse Osmosis Sanitizing Maintenance Kit features Sani-System, an EPA & NSF certified sanitizer, making it a great alternative to using chlorine bleach. The kit also includes a syringe for application of the sanitizer.


California residents Prop 65 Warning

WARNING!

This product contains materials known to the State of California to cause cancer and birth defects or other reproductive harm. www.p65warnings.ca.gov

Product Details
Capacity	2.1 Gallons
Diaphragm Materials	Butyl Rubber
Inlet Connection	1/4" MPT
Material Of Construction	Stainless Steel
Max Pressure (Psi)	100
Max Temp (°F)	110
Outlet Connection	1/4" MPT
Size	1/4"
Volume	2.1
Connection Type	Male (MPT)
Diameter	7-7/8"
Origin	Taiwan
Warranty & Certifications
Product Certification Standard	NSF/ANSI 58
Warranty	1 Year
Shipping Dimensions
Shipping Length	12 in.
Shipping Width	9 in.
Shipping Height	9 in.
Product Weight & Dimensions
Product Height	8.25 in.
Product Length	12 in.
Product Width	8.25 in.
Product Weight (lbs)	4