Pentek 155805-43 EPM-30 Carbon Block 10 micron Filter

Pentek EPM Series cartridges have a high porosity design that helps prevent the cartridge from plugging before its adsorption capability is exhausted, maximizing the utilization of the carbon while maintaining low pressure drop.

These cartridges are protected by Endurawrap, a uniquely formulated polyolefin bilaminate pre-filter, designed to significantly increase the useful life of the cartridge by trapping sediment that typically plugs carbon block cartridges.

Features:

• Highest carbon block dirt holding capacity for maximum cartridge life
• Bad taste & odor and chlorine taste & odor reduction
• Lowest pressure drop
• Economically priced
• Made entirely from FDA-compliant materials
• For a wide range of residential, food service, commercial and industrial applications

California residents Prop 65 Warning

WARNING!

This product contains materials known to the State of California to cause cancer and birth defects or other reproductive harm. www.p65warnings.ca.gov

Product Details
Application	Food & Beverage Commercial-Industrial
Capacity	9,000 Gallons
Max Temp (°F)	180 °F
Micron Rating (Nominal)	10 µm
Min Temp (°F)	40 °F
Cartridge Style	Drop-in
Change Frequency	6-12 Months
Contaminants Reduced	Sediment/Dirt/Rust Chlorine/Taste/Odor
Diameter	2-7/8"
End Cap Type	Double Open Ended (DOE)
Filter Type	Carbon Block
Flow Rate	3 GPM
Media Type	Bonded Powdered Activated Carbon (PAC)
Warranty & Certifications
Product Certification Standard	NSF/ANSI 42
Shipping Dimensions
Shipping Length	30 in.
Shipping Width	3 in.
Shipping Height	3 in.
Product Weight & Dimensions
Product Height	3
Product Length	30
Product Width	3
Product Weight (lbs)	2.992